Factories (Report of Examination of Air Receivers) (Amendment) Regulations, 1978

• Jurisdiction: Ireland
• Citation: IR SI 357/1978
• Year: 1978

S.I. No. 357 of 1978.

FACTORIES (REPORT OF EXAMINATION OF AIR RECEIVERS) (AMENDMENT) REGULATIONS, 1978.

I, GENE FITZGERALD, Minister for Labour, in exercise of the powers conferred on me by sections 6 and 42 (7) of the Factories Act, 1955 (No. 10 of 1955), and the Labour (Transfer of Departmental Administration and Ministerial Functions) Order, 1966 (No. 164 of 1966), hereby make the following regulations: 1. (1) These Regulations may be cited as the Factories (Report of Examination of Air Receivers) (Amendment) Regulations, 1978.

(2) The Factories (Report of Examination of Air Receivers) Regulations, 1956, ( S.I. No. 185 of 1956 ), and these Regulations may be cited together as the Factories (Report of Examination of Air Receivers) Regulations, 1956 and 1978.

(3) These Regulations shall come into operation on the 21st day of December, 1978. 2. The Schedule to the Factories (Report of Examination of Air Receivers) Regulations, 1956, is hereby amended by the substitution for the entries therein of the entries in the Schedule to these Regulations.

SCHEDULE.

"1. Name of Occupier of factory.

2. Address of Factory.

3. Description and distinguishing mark of receiver and type of receiver.

4. Date of construction (if ascertainable) together with a brief history of the receiver.

5. Date of last hydraulic test (if any) and pressure applied.

6. Particulars as to—

( a ) parts (if any) inaccessible at time of examination,

( b ) the examination and tests made,

( c ) condition of the receiver, including particulars of any defect materially affecting the safe working pressure.

7. Particulars as to whether the fittings and appliances are in accordance with the requirements of the Factories Act, 1955 , and whether they are properly maintained and in good condition.

8. Repairs (if any) required and the date after which the air receiver must not be used if the repairs specified have not been executed and any other conditions which the competent person making the examination considers it necessary to specify for securing safe working.

9. ( a ) Safe working pressure calculated from dimensions and from the thickness and other data ascertained by the examination, due allowance being made for conditions of working if unusual or exceptionally severe;

( b ) where repairs affecting the safe working pressure are required, safe working pressure—

(i) before the expiration of the date specified in paragraph 8,

(ii) after the expiration of...